Wednesday, April 2, 2014

Custom Made Cherry Wood Shadow Box




      Solid cherry wood was used to make this custom fit shadowbox made to hold and display a special collection of vintage rolling pins. Two wooden pegs per pin were set to fit each size rolling pin. The color of stain selected was chosen to match the kitchen cabinets. The groove inside was measured to be exactly the width of the glass which slides in and sits on the bottom on the case. The case had to be one which is solidly built in order to hold the weight of the rolling pins so I plan to attach it directly to
the wall- though it could be mounted in a couple of different ways. It could sit on a shelf, or two smaller and more light weight shadowboxes could have been made to hang more like heavy-weight picture frames.

      The overall purpose of this project was to make an attractive and protective shadowbox to compliment the contents which it houses. The box's solid and sturdy construction is built to blend into the surrounding kitchen cabinets so as not to detract from the collection itself.

For more information on products made by Old Pine Manor Restorations visit the website at: OldPineManorRestorations.org.

If you'd like information about the shadow box, please contact me at KMellott@frontier.com.









The pegs are set to fit the individual size of every rolling pin

The back fit together like a puzzle
Inside each side is a groove for the glass to fit in

Saturday, March 22, 2014

All Natural Wood Bookshelf


 This one piece bookshelf was custom made from solid wood to fit this small room. The bookshelf helps not only with storage, but by matching the stain color of the original woodwork it helps give the room a larger appearance. The shelves can be made any size and to fit any space and most color wood stains can be matched as well.

For more information, contact Kevin at Old Pine Manor Restorations.

 Old Pine Manor Restorations



 

Solid Wood Decorative Storage Box with Padded Seat Cover

 
 
This solid wood box made with decorative bead board and painted trim has a padded seat which lifts on back hinges. It could be made with a flat top (no padding) if storage rather than seating is needed on top. It's a great place to store shoes, blankets and toys! Sizes, colors and fabrics are all made to order. For more information please email us or go to the website at: oldpinemanorrestorations.com







Thursday, March 20, 2014

Natural Wood Cat Tree; Indoor Decor

Our latest home project has been this six-foot +natural wood cat tree made for our youngest daughter's cat, Dandelion. The cat is a Maine Coon mix, so it loves to climb and play, which is fun to watch- as long as it doesn't destroy any furniture. This is just a simple snapshot, but the tree's reception has been overwhelmingly favorable (by both the family and Dandelion).
 
The entire cat tree is made from all natural wood. I even used wooden posts to assemble it so the tree can disassemble easily enough to make moving it more simple. The shelves can be made of any size in order to fit any size cat, or cats, and the main post can be of any height as well.

I had some drying time involved before I began sanding, however the tree was mostly dry prior to the construction. I sanded the center wood post after it was dry and then bored the holes used for the posts' assembly. At the bottom you can see I used a half piece of lumber because I knew this particular cat tree would be going up against a wall. Although it's stable, a cat tree which is not going to be used against a wall would need to have a completely round wheel of wood at the base for safety reasons.

All products used in the construction of the cat tree are safe for pets. If you're interested in a custom-made cat tree and would like more information, please email: kmellott@frontier.com.

 
Product produced by Old Pine Manor Restorations







 





HISTORIC LANDSCAPE ARCHITECTURE


"The pergola catches the attention of most visitors. This formal, almost Palladian, wooden
structure has two main open gable roofs, supported on wood posts, with a wooden arch under the
open gable. Open pergola areas with open beams flank the gables. Another wooden arch links
the two gables and frames a picket gate with open circle top. Historic photos show awnings
suspended from the fronts of the gables for shade. The rear “wall” of the structure is closed off
by square grid lattice work.
 
The landscape retains many significant aspects of its organizational structure, as well as
plantings such as the trees. The current owners have gradually recovered lost landscape elements,
and are restoring removed items. For example, Martin installed tall, polygonal sided light
fixtures on the grounds; several of these have been restored and installed. Lights, a working
fountain, and removal of overgrowth from stone landscape features adds significantly to the
integrity of feeling of the landscape."
 
From: The United States Department of the Interior
 
 
--National Park Service


 
This view shows the grape vines located behind and around the northeast corner of the pergolas. Our bichon, Isabelle is standing on the picnic table.
Above: 24 foot Crouse-Hinds Lamp fully restored


 

 http://www.in.gov/dnr/historic/files/violett_final.pdf

Tuesday, January 28, 2014

Carriage House Doors Restoration and Reproduction Project

Although we're in the midst of a historic deep freeze now, these photos of our garage doors were taken on a sunny day not too long ago.

The doors were built about ten years ago using
1 x 4 tongue and groove fir wood. I chose to replicate carriage house doors because they fit the look and size of the original doors previously found on this garage which is attached to the original shop and green house. The lumber on the old doors was rotted beyond repair, otherwise I would have restored the existing doors. We try to follow this rule whenever possible; restore first, replicate only when absolutely necessary.

Because the quality is much better than what could be purchased locally today, I utilized the garage doors' original track and hardware which was installed in 1936. Little work was required to refurbish the hardware; primarily all that was needed was a light, non-abrasive cleaning. The original electrical buttons (typically found inside the home serving as what would later be light switches) are still working and located on the wall inside the garage.

There are four doors on this garage, which means I have two more to refurbish, though the two on the north side are in much better condition than those previously on the south side. The four doors allow for driving through to the back entry way.

Because I've always had at least one project going on at the Old Pine Manor, I've lost count of how many restoration projects we've completed since living here. It's all been done to the best of our abilities, which means everything has taken more time than the average home repair project. My wife worked as a museum director/curator for over 16 years, was a member on the board of local representatives for the Northern Indiana Historic Landmarks as well as being involved in a number of projects related to historic preservation and restoration. She's been my consultant and a constant source of encouragement. Though she admittedly isn't patient with the time frame issues, she does know the correct procedures for structural restorations and we've spent the past couple of decades learning and implementing restoration techniques at The Olde Pine Manor.

The previous owners of our home were great people; a personable couple with four young children. He  was a pediatrician whose hobbies included woodworking and she was a stay at home mom with a master's degree in education. They put a great deal of loving time into the home as well as the financial amount necessary to do what my wife would call, "securing the envelope of the structure(s) and making the internal electrical system safe." This included putting on a new roof, installing a new cement floor in the garage and having the old electrical wiring replaced, to name but a few projects they tackled in the three years they lived here. To keep things simple, we'll say the doctor was being relocated. His wife said they'd believed this was going to be their "Forever Home," and in a sense it is because we are forever grateful to them for the work they put into this place before we purchased it. Before leaving, the doctor, with his arms open as he gestured emphatically had said to us, "Who better to own this home? A museum director and a contractor who knows about building construction. It's perfect." This was the blessing we needed to hear as they moved on and we moved in.




Thursday, January 23, 2014

Authentic 1929 Miniature Kohler & Campbell Fully Piano Restored

This 1929 Miniature (or Child's) Kohler & Campbell has been fully restored, though when we found it the exterior was painted an olive green. It had been used at a preschool by many children who didn't know how to treat a piano properly- which meant the interior was in equally as sad of shape as the exterior.

Before being donated to a preschool and the affiliated church, the piano was owned by one family for three generations. The piano was in such poor condition that it was given to me simply if I would remove it from the premises. Many miles and many hours later, the piano has been restored. Though it wasn't simple, it was a complete pleasure to be able to see and hear this beautiful piece in perfect shape once again!

The interior workings of this piano was been completely restored by a professional who said he's seen only a few of its' kind in his seventy-some years of working with in the field of piano restoration. I restored the exterior- the woodwork and hardware- by completely disassembling every piece of it, including the strings. It has a beautiful sound. It is amazing. Even +Abe Maksymovich, our piano man, says he cannot believe the beautiful sound which comes from this miniature piano.